Download PDF
← Technical datasheet
Dratec · Stainless steels
FERVEO

DT-308 H TIG — ER 308 H

Technical datasheet · TIG rod · Ø 1 – 3.2 mm
FT-DT-308-H-TIG-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
TIG rod
Standard
ER 308 H
Diameters
Ø 1 – 3.2 mm
Sizes and packaging
Ø
Packaging
Code
1 mm
box 10 kg
DRT-1672-10
1.6 mm
box 10 kg
DRT-1672-16
2 mm
box 10 kg
DRT-1672-20
2.4 mm
box 10 kg
DRT-1672-24
3.2 mm
box 10 kg
DRT-1672-32

Indicative diameters; confirmed with the order

Application

The filler material DT-308H is an alloy with 20 % Cr and 10 % Ni and an increased carbon content of 0.04-0.08 % for welding matching stainless steels. The material is also used for service requiring creep resistance (approx. 700 °C) and for welding stabilised materials with a higher carbon content such as Types 321H and 347H.

Classification
AWS class
ER 308 H
EN ISO class
W 19 9 H
ISO 14343-B
(19-10H)
Chemical composition of the wire
C
Cr
Mn
Mo
Ni
Si
0.06
20.0
1.90
0.10
9.50
0.60
Values in mass %.
Base metals

1.4878 · 1.4948 · AISI 304 · 321H · 347H

Mechanical properties
guide values
Yield strength (Rp0.2)
370 MPa
Tensile strength (Rm)
570 MPa
Elongation (A5)
35 %
Impact energy (KV)
70 J (20 °C)
Service temperature
max. 700 °C
Process
Polarity
DC−
Shielding gas
I1
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-308-H-TIG-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Dratec 2025 catalogue