We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Dratec · Stainless steels

DT-308 F FCW — E 308 L T-0-1/4

flux-cored wire (FCW)

Choose the size

  • Ø 1.2 mm
    ≈ 15 kg
  • Ø 1.6 mm
    ≈ 15 kg
  • Ø 2.4 mm
    ≈ 15 kg
  • Ø 3.2 mm
    ≈ 15 kg

Indicative diameters; confirmed with the order

Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)

To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 136 · η 0.80–0.90
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

5.07–7.71 kg

of DT-308 F FCW for 10 m of weld

1 pack of ≈ 15 kg

Calculated with: η 0.80–0.90: typical value for process 136 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 308L

Not recommendedFN — (WRC-1992)

  • Martensite in the weld: risk of cracking. Use a richer filler (309L, 312) or lower the dilution.

Maximum dilution with this filler: 11.5 %

Calculated with: filler 308L — this product · dilution 30 % typical of 136, equal shares of each metal

See the full calculation →

Field of application

Joint welding of stainless austenitic steels. Service temperatures up to 350 °C (scale-resistant up to 800 °C). Almost spatter-free welding, very good slag removal

Base metals

1.43011.43031.43061.43081.43101.43111.45411.45501.4552
PositionsPA flat PB horizontal-vertical
PolarityDC+
Shielding gasM21, C1

Classification and approvals

Classification

AWS classE 308 L T-0-1/4
EN ISO classT 19 9 L R C/M 3
Material no. (W.-Nr.)1.4316

Approvals

  • TÜV
According to the Dratec 2025 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.03
Cr20.0
Mn1.60
Ni10.0
Si0.60
Values in mass %.

Mechanical properties

guide values
Yield strength (Rp0.2)410 MPa
Tensile strength (Rm)570 MPa
Elongation (A5)40 %
Impact energy (KV)45 J (−20 °C)
Service temperaturemax. 350 °C

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Corrosion-resistant alloys