Dratec · Nickel alloys

DT-2.4858 MIG — ER NiFeCr-1
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-2-4858-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
ER NiFeCr-1
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1487-08
1 mm
K300 15–20 kg
DRT-1487-10
1.2 mm
K300 15–20 kg
DRT-1487-12
1.6 mm
K300 15–20 kg
DRT-1487-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
Joint welding and surfacing of Alloy 825 (2.4858, UNS N08825) and other CrNiMoCu alloys. Good corrosion resistance in acids containing sulphur and phosphorus
Classification
AWS class
ER NiFeCr-1
EN ISO class
S Ni 8065 – NiFe30Cr21Mo3
Material no. (W.-Nr.)
2.4858
Chemical composition of the wire
C
Cr
Cu
Fe
Mn
Mo
Ni
Si
Ti
0.01
22.5
2.50
balance
0.80
3.10
44.0
0.30
0.90
Values in mass %.
Base metals
UNS N08904 · Alloy 825 (2.4858, UNS N08825)
Mechanical properties
guide values
Yield strength (Rp0.2)
approx. 360 MPa
Tensile strength (Rm)
approx. 550 MPa
Elongation (A5)
approx. 30 %
Impact energy (KV)
approx. 100 J
Process
Polarity
DC+
Shielding gas
I1
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-2-4858-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue