Dratec · Nickel alloys

DT-2.4667 MIG — ER NiFeCr-2
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-2-4667-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
ER NiFeCr-2
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1453-08
1 mm
K300 15–20 kg
DRT-1453-10
1.2 mm
K300 15–20 kg
DRT-1453-12
1.6 mm
K300 15–20 kg
DRT-1453-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
DT-2.4667 is used for welding alloy 718, 706 and X-750. Precipitation-hardening weld metal. Ensure a low heat input. Use an interpass temperature of approx. 100 °C.
Classification
AWS class
ER NiFeCr-2
EN ISO class
S Ni 7718 – NiCr19Fe19Nb5Mo3
Material no. (W.-Nr.)
2.4667
Chemical composition of the wire
C
Al
Cr
Fe
Mo
Nb
Ni
Si
Ti
0.05
0.50
18.5
18.0
3.00
5.00
balance
0.15
1.00
Values in mass %.
Base metals
Alloy 706 (N09706) · Alloy 718 (2.4668) · Alloy X-750 (2.4669)–N07750
Mechanical properties
guide values
Yield strength (Rp0.2)
approx. 600 MPa
Tensile strength (Rm)
approx. 800 MPa
Elongation (A5)
approx. 25 %
Process
Polarity
DC+
Shielding gas
I1
Treatment and preparation
Interpass temperature
approx. 100 °C
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-2-4667-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue