Dratec · Nickel alloys

DT-2.4635 MIG — ER NiCrMo-10
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-2-4635-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
ER NiCrMo-10
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1491-08
1 mm
K300 15–20 kg
DRT-1491-10
1.2 mm
K300 15–20 kg
DRT-1491-12
1.6 mm
K300 15–20 kg
DRT-1491-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
Joint welding of nickel-chromium-molybdenum alloys such as 2.4610 / Alloy C4, 2.4819 / Alloy C276 and 2.4602 / Alloy C22 with one another, as well as for joint welding of carbon steels.
Classification
AWS class
ER NiCrMo-10
EN ISO class
SG – NiCr21Mo13Fe4W3 (S Ni 6022)
Material no. (W.-Nr.)
2.4635
Chemical composition of the wire
C
W
Cr
Fe
Mn
Mo
Ni
0.004
3.00
21.2
2.20
0.30
13.6
balance
Values in mass %.
Base metals
2.4602 (Alloy C22) · 2.4610 (Alloy C4) · 2.4819 (Alloy C276) · 2.4858 (Alloy 825) · Alloy C4 with 2.4819
Mechanical properties
guide values
Tensile strength (Rm)
690 MPa
Elongation (A5)
40 %
Process
Polarity
DC+
Shielding gas
I1
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-2-4635-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue