Dratec · Nickel alloys

DT-2.4607 MIG — ER NiCrMo-13
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-2-4607-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
ER NiCrMo-13
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1660-08
1 mm
K300 15–20 kg
DRT-1660-10
1.2 mm
K300 15–20 kg
DRT-1660-12
1.6 mm
K300 15–20 kg
DRT-1660-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
Stainless and highly corrosion-resistant filler metal. Very good properties, especially in reducing and oxidising media. Joint welding and surfacing on matching and similar cast alloys.
Classification
AWS class
ER NiCrMo-13
EN ISO class
NiCr 23Mo16 – (S Ni 6059)
Material no. (W.-Nr.)
2.4607
Chemical composition of the wire
C
Cr
Fe
Mn
Mo
Ni
Si
0.01
23.0
< 1.50
< 0.50
16.0
balance
0.10
Values in mass %.
Base metals
1.4565 · 2.4602 · 2.4605 · 2.4610 · 2.4819 · 2.4819 Alloy 59 · X2CrNiMnMoNbN25-18-5-4
Mechanical properties
guide values
Yield strength (Rp0.2)
490 MPa
Tensile strength (Rm)
760 MPa
Elongation (A5)
44 %
Impact energy (KV)
> 100 J
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-2-4607-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue