Dratec · Nickel alloys

DT-2.4155 MIG — ER Ni-1
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-2-4155-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
ER Ni-1
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1677-08
1 mm
K300 15–20 kg
DRT-1677-10
1.2 mm
K300 15–20 kg
DRT-1677-12
1.6 mm
K300 15–20 kg
DRT-1677-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
Joint welding of pure nickel and nickel alloys, as well as cast iron. Surfacing; nickel-steel dissimilar joints
Classification
AWS class
ER Ni-1
EN ISO class
SG – NiTi3 (S Ni 2061)
Material no. (W.-Nr.)
2.4155
Chemical composition of the wire
C
Mn
Ni
Si
Ti
0.02
0.40
balance
0.40
3.00
Values in mass %.
Base metals
2.4060 · 2.4061 · 2.4066 · 2.4116 · 2.4170 · Nickel 200 · Nickel 201 · Nickel 99
Mechanical properties
guide values
Yield strength (Rp0.2)
300 MPa
Tensile strength (Rm)
450 MPa
Elongation (A5)
25 %
Impact energy (KV)
150 J
Process
Polarity
DC+
Shielding gas
I1
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-2-4155-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue