Download PDF
← Technical datasheet
Dratec · Stainless steels
FERVEO

DT-1.4835 MIG — ZX9CrNiSiNCe21-11-2

Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-1-4835-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
ZX9CrNiSiNCe21-11-2
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1520-08
1 mm
K300 15–20 kg
DRT-1520-10
1.2 mm
K300 15–20 kg
DRT-1520-12
1.6 mm
K300 15–20 kg
DRT-1520-16

Indicative diameters; confirmed with the order

Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)

Application

DT-1.4835 is a specially developed MIG/MAG wire and TIG rod for welding heat-resisting steels such as Outokumpu 253 MA; it offers excellent corrosion resistance at high temperatures but is not suitable for wet corrosion. Resistant to scaling up to approx. 1150 °C (in air).

Classification
EN ISO class
ZX9CrNiSiNCe21-11-2
Material no. (W.-Nr.)
1.4835
Chemical composition of the wire
C
N
Cr
Mn
Ni
Si
0.07
0.15
21.0
0.60
10.0
1.50
Values in mass %.
Base metals

1.4818 · 1.4835 · Outokumpu 153 MA ® · Outokumpu 253 MA ®

Mechanical properties
guide values, at room temperature
Yield strength (Rp0.2)
440 MPa
Tensile strength (Rm)
680 MPa
Elongation (A5)
38 %
Impact energy (KV)
100 J
Process
Polarity
DC+
Shielding gas
M12, M13
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-1-4835-MIG-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Dratec 2025 catalogue