Download PDF
← Technical datasheet
Dratec · Stainless steels
FERVEO

DT-1.4542 MIG — ER 630 (17-4 PH)

Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-1-4542-MIG-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
solid wire
Standard
ER 630 (17-4 PH)
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1893-08
1 mm
K300 15–20 kg
DRT-1893-10
1.2 mm
K300 15–20 kg
DRT-1893-12
1.6 mm
K300 15–20 kg
DRT-1893-16

Indicative diameters; confirmed with the order

Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)

Application

DT-1.4542 is a precipitation-hardenable stainless steel with high yield strength, high wear resistance and good corrosion resistance. To avoid stress cracking, the material should undergo solution annealing followed by ageing as soon as possible after welding.

Classification
AWS class
ER 630 (17-4 PH)
EN ISO class
630
Material no. (W.-Nr.)
1.4542
Chemical composition of the wire
C
Cr
Cu
Mn
Mo
Nb
Ni
Si
0.02
16.7
3.50
0.55
0.20
0.25
4.70
0.47
Values in mass %.
Base metals

1.4525 · 1.4542 (Alloy 17-4) · 1.4504 (Alloy 17-7)

Mechanical properties
guide values, at room temperature
Yield strength (Rp0.2)
850 MPa
Tensile strength (Rm)
990 MPa
Elongation (A5)
10 %
Hardness
guide values, at room temperature
320 HB
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-1-4542-MIG-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Dratec 2025 catalogue

Dratec · Stainless steels
FERVEO

DT-1.4542 MIG — ER 630 (17-4 PH)

Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-1-4542-MIG-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Shielding gas
M12, M13
Treatment and preparation
Post-weld heat treatment
solution annealing followed by ageing
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-1-4542-MIG-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Dratec 2025 catalogue