Dratec · Stainless steels

DT-1.4502 TIG — ~ER 430 (Ti)/ ~ER 439
Technical datasheet · TIG rod · Ø 1 – 3.2 mm
FT-DT-1-4502-TIG-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
TIG rod
Standard
~ER 430 (Ti)/ ~ER 439
Diameters
Ø 1 – 3.2 mm
Sizes and packaging
Ø
Packaging
Code
1 mm
box 10 kg
DRT-1709-10
1.6 mm
box 10 kg
DRT-1709-16
2 mm
box 10 kg
DRT-1709-20
2.4 mm
box 10 kg
DRT-1709-24
3.2 mm
box 10 kg
DRT-1709-32
Indicative diameters; confirmed with the order
Application
Surfacing of stainless sealing faces of gas, water and steam valves, for service temperatures up to 450 °C. For joining matching steels or cast steels. Resistant to scaling up to +900 °C in air and in oxidising combustion gases.
Classification
AWS class
~ER 430 (Ti)/ ~ER 439
EN ISO class
G Z 17 Ti
Material no. (W.-Nr.)
1.4502
DIN 8555 class
MSG 5-250-ZR
Chemical composition of the wire
C
Cr
Mn
Si
Ti
0.05
17.5
0.40
0.70
8×C
Values in mass %.
Base metals
1.4016 · 1.4502 · 1.4511
Mechanical properties
guide values
Yield strength (Rp0.2)
300 MPa
Tensile strength (Rm)
500 MPa
Elongation (A5)
20 %
Service temperature
max. 450 °C
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-1-4502-TIG-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue