Dratec · Stainless steels

DT-1.4455 MIG — G 20 16 3 Mn L
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-1-4455-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
G 20 16 3 Mn L
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1578-08
1 mm
K300 15–20 kg
DRT-1578-10
1.2 mm
K300 15–20 kg
DRT-1578-12
1.6 mm
K300 15–20 kg
DRT-1578-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
Filler material for MIG/MAG welding of non-magnetic, stainless and low-temperature-tough austenitic steels, and for dissimilar joints; service temperature –196 °C up to +400 °C.
Classification
EN ISO class
G 20 16 3 Mn L
Material no. (W.-Nr.)
1.4455
Chemical composition of the wire
C
N
Cr
Mn
Mo
Ni
Si
0.02
0.15
20.0
7.30
2.70
16.0
0.50
Values in mass %.
Base metals
1.3948 · 1.3951 · 1.3952 · 1.3953 · 1.3964 · 1.4429 · 1.4438 · 1.4583 · 1.5637 · 1.5662 · 1.5680 · 1.6905
Mechanical properties
guide values
Yield strength (Rp0.2)
400 MPa
Tensile strength (Rm)
600 MPa
Elongation (A5)
30 %
Impact energy (KV)
75 J
Service temperature
max. 400 °C
Process
Polarity
DC+
Shielding gas
M12, M13
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-1-4455-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue