Dratec · Stainless steels

DT-1.4351 TIG — ER 410 NiMo
Technical datasheet · TIG rod · Ø 1 – 3.2 mm
FT-DT-1-4351-TIG-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
TIG rod
Standard
ER 410 NiMo
Diameters
Ø 1 – 3.2 mm
Sizes and packaging
Ø
Packaging
Code
1 mm
box 10 kg
DRT-1846-10
1.6 mm
box 10 kg
DRT-1846-16
2 mm
box 10 kg
DRT-1846-20
2.4 mm
box 10 kg
DRT-1846-24
3.2 mm
box 10 kg
DRT-1846-32
Indicative diameters; confirmed with the order
Application
For joining and surfacing on matching 13 % Cr and CrNi steels, and for surfacing on non-alloy steels (take dilution into account). As corrosion-resistant as matching 13 % Cr(Ni) steels and cast steel.
Classification
AWS class
ER 410 NiMo
EN ISO class
W 13 4
Material no. (W.-Nr.)
1.4351
ISO 14343-B
SS410NiMo
Chemical composition of the wire
C
Cr
Mn
Mo
Ni
Si
0.05
13.5
0.60
0.50
4.50
0.60
Values in mass %.
Base metals
1.4002 · 1.4313
Mechanical properties
guide values
Yield strength (Rp0.2)
600 MPa
Tensile strength (Rm)
800 MPa
Elongation (A5)
15 %
Impact energy (KV)
50 J
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-1-4351-TIG-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue