Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
For joining and surfacing on matching 13 % Cr and CrNi steels, and for surfacing on non-alloy steels (take dilution into account). As corrosion-resistant as matching 13 % Cr(Ni) steels and cast steel.
Classification
AWS class
ER 410 NiMo
EN ISO class
G 13 4
Materialno.(W.-Nr.)
1.4351
ISO14343-B
SS410NiMo
Chemical composition of the wire
C
Cr
Mn
Mo
Ni
Si
0.05
13.5
0.60
0.50
4.50
0.60
Values in mass %.
Base metals
1.4002 · 1.4313
Mechanical properties
guide values
Yield strength (Rp0.2)
600 MPa
Tensile strength (Rm)
800 MPa
Elongation (A5)
15 %
Impact energy (KV)
50 J
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-1-4351-MIG-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-1-4351-MIG-EN · rev. 2 · page 2 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.