Gedik · Copper, brasses and bronzes

CuNiFe SG TIG — S Cu 7061(CuNi10)
Technical datasheet · TIG rod · Ø 1.6 – 3.2 mm
FT-CUNIFE-SG-TIG-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
TIG rod
Standard
S Cu 7061(CuNi10)
Diameters
Ø 1.6 – 3.2 mm
Sizes and packaging
Ø
Length
Packaging
Code
1.6 mm
1000 mm
5 kg
GDK-6031100258
2 mm
1000 mm
5 kg
GDK-6031100259
2.4 mm
1000 mm
5 kg
GDK-6031100385
3.2 mm
1000 mm
5 kg
GDK-6031100260
Application
- It is used for copper nickel alloys with 10% nickel such as CuNi5Fe, CuNi10Fe.
- Weld deposit is highly corrosion resistant
- It is used for joining and surfacing copper-nickel alloys and CuNiFe pipes which perform in corrosive areas such as seawater
- Shielding Gas: Ar
Classification
EN ISO class
S Cu 7061(CuNi10)
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the wire
Cu
Fe
Mn
Ni
Ti
balance
1.80
1.00
10.0
0.17
Values in mass %.
Base metals
CUNIFER 30 · CUNIFER 40 · 2.0862 · CuNi5Fe · 2.0872 · CuNi10Fe
Mechanical properties
Yield strength (Rp0.2)
150 MPa
Tensile strength (Rm)
350 MPa
Elongation (A5)
30 %
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-CUNIFE-SG-TIG-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue