Download PDF
← Technical datasheet
Kjellberg · Carbon steels
FERVEO

AQUAWELD

Technical datasheet · covered electrode · stick electrode · Ø 3.25 mm
FT-AQUAWELD-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Diameters
Ø 3.25 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
3.25 mm
350 mm
140–190 A
4.3 kg
KJB-00995323
Application

Special electrode with a rutile-basic covering and an electrically insulating, water-repellent protective coating for wet underwater manual metal arc welding. Suitable for site and repair welding down to 20 m water depth in offshore and harbour construction, shipbuilding and hydraulic steel structures.

Approvals

DNV-GL

Validity is confirmed with the order

Chemical composition of the weld metal
C
Mn
Mo
Si
0.05
0.50
0.50
0.25
Values in mass %.
Base metals

Non-alloy structural steels with a carbon equivalent CEV according to IIW of max. 0.4 % (CEV = C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15 in %)

Mechanical properties
Yield strength (Rp0.2)
> 440 MPa
Tensile strength (Rm)
> 480 MPa
Impact energy (KV)
min. 30 J (0 °C)
Process
Polarity
DC−
Positions
PA flat · PB horizontal-vertical · PE overhead · PG vertical-down
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-AQUAWELD-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Kjellberg 2019 catalogue