Download PDF
← Technical datasheet
Gedik · Aluminium
FERVEO

AlSi 5 MIG — ER 4043

Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-ALSI-5-MIG-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
solid wire
Standard
ER 4043
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
5 kg
GDK-6011100292
1 mm
7 kg
GDK-6011100293
1.2 mm
7 kg
GDK-6011100294
1.6 mm
7 kg
GDK-6011100295
Application
  • It is Al-Si welding MIG wire
  • Application range is joining of cast aluminum parts and aluminum profiles, motor blocks.
  • Material range is AIMgSi 0.5, AIMgSiCu, Al99.5 etc
  • It is recommended that preheating to 105°C before welding of plates thicker than 10 mm
  • Required use of Ar, He or Ar+He gas as shielding gas
Classification
AWS class
ER 4043
EN ISO class
S Al 4043 (AlSi5)
Approvals

SEPRO, CE

Validity is confirmed with the order

Chemical composition of the wire
Al
Fe
Mn
Si
balance
0.50
0.03
5.00
Values in mass %.
Base metals

AlMgSi 0.5 · AlMg1SiCu · AlMgSi 1 · AlZn4.5Mg 1 · Al 99.5 · Al 99 · AlCuMg 1 · AlMgSi 0.7 · AlMgSi 0.8 · AlMn 1 · G-AlSi 6 Cu 4

Mechanical properties
Yield strength (Rp0.2)
110 MPa
Tensile strength (Rm)
150 MPa
Elongation (A5)
15 %
Process
Polarity
DC+
Shielding gas
Ar, He, Ar + He
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ALSI-5-MIG-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Aluminium
FERVEO

AlSi 5 MIG — ER 4043

Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-ALSI-5-MIG-EN
rev. 2 · 2026-11-21
page 2 / 2
Process (cont.)
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
Treatment and preparation
Pre-heating
105 °C, for plates thicker than 10 mm
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ALSI-5-MIG-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue