Download PDF
← Technical datasheet
Gedik · Aluminium
FERVEO

AlSi 12 TIG — ER 4047

Technical datasheet · TIG rod · Ø 2 – 3.2 mm
FT-ALSI-12-TIG-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
TIG rod
Process
TIG welding · gas welding
Standard
ER 4047
Diameters
Ø 2 – 3.2 mm
Sizes and packaging
Ø
Length
Packaging
Code
2 mm
1000 mm
5 kg
GDK-6011100288
2.4 mm
1000 mm
5 kg
GDK-6011100289
3.2 mm
1000 mm
5 kg
GDK-6011100290
Application
  • AISi 12 is aluminum TIG rod with high content of Silicon
  • It is used for joining and filling of aluminum silicon cast alloys including more than 7% silicon
  • It has a good fluidity. Oxyacetylene welding and brazing is possible with GeKaTec F-LH1
  • It is recommended that preheating to 150°C before welding of plates thicker than 15mm
  • Shielding gas: Ar
Classification
AWS class
ER 4047
EN ISO class
S Al 4047 (AlSi 12)
EN ISO 17672
Al 112
Welding process
TIG welding · gas welding
Approvals

SEPRO, CE

Validity is confirmed with the order

Chemical composition of the wire
Al
Fe
Mn
Si
balance
< 0.50
< 0.30
12.0
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
80 MPa
Tensile strength (Rm)
170 MPa
Elongation (A5)
8 %
Hardness
45 HB
Process
Polarity
AC
Shielding gas
Ar
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ALSI-12-TIG-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Aluminium
FERVEO

AlSi 12 TIG — ER 4047

Technical datasheet · TIG rod · Ø 2 – 3.2 mm
FT-ALSI-12-TIG-EN
rev. 2 · 2026-11-21
page 2 / 2
Process (cont.)
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
Treatment and preparation
Pre-heating
150 °C, for plates thicker than 15 mm
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ALSI-12-TIG-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue