Gedik · Aluminium

AlMg 5 MIG — ER 5356
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-ALMG-5-MIG-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
solid wire
Standard
ER 5356
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
5 kg
GDK-6011100277
1 mm
7 kg
GDK-6011100278
1.2 mm
7 kg
GDK-6011100279
1.6 mm
7 kg
GDK-6011100058
Application
- For joining aluminium alloys with more than 3 % Mg. Resistant to seawater
- Applications: tanks and vessels, masts and columns, boats and marine applications
- Shielding gas required: Ar, He or Ar + He
- Preheating to 150 °C is recommended for plates thicker than 10 mm
Classification
AWS class
ER 5356
EN ISO class
S Al 5356 (AlMg5Cr(A))
Approvals
SEPRO, CE
Validity is confirmed with the order
Chemical composition of the wire
Al
Fe
Mg
Mn
Si
balance
< 0.40
5.00
0.30
< 0.25
Values in mass %.
Base metals
AlMg 5 · AlMg 4.5 · G-AlMg 5 · G-AlMg 10 · AlMgSi 1 · G-AlMg 3(Cu) · AlMg 2.5Mn · AlMg 2 Mn 0.8 · AlMg 3 · AlMg 3 Si · G-Almg 3 · AlMg 4.5 Mn · G-AlMg 3 Si · AlMg Si 0.5 · AlMgSi 0.7 · AlMgSi 0.8 · AlMgSi 1 Cu · AlZn 4.5 Mg 1
Mechanical properties
Yield strength (Rp0.2)
180 MPa
Tensile strength (Rm)
260 MPa
Elongation (A5)
20 %
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ALMG-5-MIG-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue