Gedik · Aluminium

AlMg 3 MIG — ER 5754
Technical datasheet · solid wire · Ø 1.2 – 1.6 mm
FT-ALMG-3-MIG-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
solid wire
Standard
ER 5754
Diameters
Ø 1.2 – 1.6 mm
Application
- It is used for joining aluminum alloys includes up to 3 % Mg. Resistance to sea water. Parent metals AIMg 1, AIMg 2.5, and AIMg 2 Mn 0.8 etc
- Required use of Ar, He or Ar+He gas as shielding gas
- It is recommended that preheating to 150°C before welding of plates thicker than 10mm
Classification
AWS class
ER 5754
EN ISO class
S Al 5754 (AlMg3)
Approvals
SEPRO, CE
Validity is confirmed with the order
Chemical composition of the wire
Al
Fe
Mg
Mn
Si
balance
< 0.40
3.00
< 0.50
< 0.40
Values in mass %.
Base metals
AlMg 1 · AlMg 2.5 · AlMg 3 · AlMg 2.7 Mn · AlMg Si 0.5 · AlMg 2 · AlMg2 Mn 0.8 · AlMgSi 0.7 · AlMgSi 0.8 · G-AlMg 3 · G-AlMg3 (Cu) · G-AlMg 3 Si
Mechanical properties
Yield strength (Rp0.2)
100 MPa
Tensile strength (Rm)
200 MPa
Elongation (A5)
20 %
Process
Polarity
DC+
Shielding gas
Ar, He, Ar + He
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ALMG-3-MIG-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue