We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Hardfacing

500 G MIG — S Fe 2

solid wire
also as: TIG rod

Choose the size

  • Ø 1.2 mm · BS 300 spool
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

  • Excellent resistance to wear and shocks
  • Parts of excavators, mordan bucket teeth, drilling and percussion bits, shaping machines, screw conveyors, crushers, moulds, guide rollers, etc
  • Before the application of welding, it is recommended pre-heating of 300°C
  • If necessary, post-weld stress relief should be made at 690°C
  • Shielding Gas: MAG; Ar+CO2 mix gases & TIG; % 100 Ar gas can be used
PolarityDC+
Shielding gasAr + CO2

Classification and approvals

Classification

EN 14700 classS Fe 2
DIN 8555 classMSG / WSG 2-GZ-50

Approvals

  • SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C1.10
Cr1.80
Mn1.90
Si0.50
Ti0.20
Values in mass %.

Hardness

  • Hardness after work hardening — 47–52 HRC

How to weld

Process

ShieldingRequires shielding gas

Treatment and preparation

Pre-heating300 °C
Post-weld heat treatment690 °C, if necessary
FERVEO guidance
By problem
Wear-resistant hardfacing