Gedik · Hardfacing
350 G MIG
solid wire
Choose the size
- Ø 1.2 mm · BS 300 spool≈ 15 kg
To order · price and lead time in the quote
We reply within 1 working day.
Field of application
- Cr-Mo alloyed steels (2.5%-1.0%) resistant to high temperature, wear, pressure and shocks
- Good resistance to cracking and to the attack of sulphurous agents
- Guide rollers, excavators, screw conveyers, gears, moulds, rolling surfaces, etc
- Before the application of welding, it is recommended pre-heating of 200°C
- If necessary, post-weld stress relief should be made at 660°C
- Shielding Gas: Ar+CO2 mix gases can be used
| Polarity | DC+ |
|---|---|
| Shielding gas | Ar + CO2 |
Classification and approvals
Classification
| DIN 8555 class | MSG 5-GZ-350 |
|---|
Approvals
- SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the wire
| C | 0.50 |
|---|---|
| Cr | 6.00 |
| Mn | 0.90 |
| Mo | 0.90 |
| Si | 0.55 |
Values in mass %.
Hardness
- Hardness after work hardening — 36–40 HRC
How to weld
Process
| Shielding | Requires shielding gas |
|---|
Treatment and preparation
| Pre-heating | 200 °C |
|---|---|
| Post-weld heat treatment | 660 °C, if necessary |
FERVEO guidance
Alternatives in the catalogue
Same class
same DIN 8555 designation
| Product | Class | Availability |
|---|---|---|
| DT-SG 350 MIGDratec | M/WSG 5-GZ-350 | To order · price and lead time in the quote |