We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket

Calculators

Dissimilar metal joints — Schaeffler and WRC-1992 diagrams

Where the weld lands given the two base metals, the filler and the dilution: diagram zone, ferrite and ferrite number FN. Use it to choose the filler for carbon steel to stainless or between two different stainless steels.

Base metals

Nominal compositions: base metals to EN 10025-2 and EN 10088-2; filler by its class, not by a brand.

Filler and process
Share of the weld that comes from the base metals30 % by default with this process
50 % if both parts melt equally
How we calculate it
  1. Schaeffler equivalents — Schaeffler 1949
    Cr eq = Cr + Mo + 1.5·Si + 0.5·Nb Ni eq = Ni + 30·C + 0.5·Mn S355J2: 0.83 / 6.80 · 1.4301: 20.00 / 12.35 · 307: 21.50 / 14.55
  2. WRC-1992 equivalents — Kotecki & Siewert, 1992
    Cr eq = Cr + Mo + 0.7·Nb Ni eq = Ni + 35·C + 20·N + 0.25·Cu
  3. Weld composition (lever rule)
    X_weld = (1 − D)·X_filler + D·s·X_1 + D·(1 − s)·X_2; D = 30 %, s = 50 % C 0.10 · Si 0.58 · Mn 3.34 · Cr 16.60 · Ni 8.28 · Mo 0.70 · N 0.04
  4. Point on the diagrams
    Schaeffler: Cr eq 18.17, Ni eq 13.06 → A, 0.0 % WRC-1992: Cr eq 17.30, Ni eq 12.74 → FN 0.0, A

ResultSuitable

Zone A

FN 0.0 (WRC-1992) · ferrite 0.0 % (Schaeffler) · solidification A

  • Fully austenitic with manganese: tolerates no ferrite (307 type).

Fillers for this pair

Butt joint without a buffer layer. Maximum dilution: the highest at which the weld is still acceptable by its structure.

FillerAssessmentMax. dilution, %
309LMo · E 23 12 2 LSuitable41.5
312 · E 29 9Suitable57.5
AWS E307Suitable45.5
309L · E 23 12 LWith reservations25.5

Schaeffler diagramSchaeffler 1949 · Kotecki & Siewert 1992

0481216202428323640051015202530Cr eq = Cr + Mo + 1.5·Si + 0.5·NbNi eq = Ni + 30·C + 0.5·Mn0 %5 %10 %20 %40 %80 %100 %AMFA+MS355J21.4301307weld
  • metal 1
  • metal 2
  • filler
  • weld

WRC-1992 — ferrite numberISO 8249 · FN

182022242628301012141618Cr eq = Cr + Mo + 0.7·NbNi eq = Ni + 35·C + 20·N + 0.25·Cu2468102030405060708090100FN 0.0

From the catalogue, for this result

Class AWS E307, for the chosen process

  • ELOXCOR S 307 FCW
    AWS E307T1-1/-4 (mod.) · EN ISO T 18 8 Mn P M21/C1 1
    See product →

Standards and sources

  1. Schaeffler, Metal Progress 56 (1949) — constitution diagram: zones A, M and F
  2. Kotecki & Siewert, Welding Journal 71 (5), 1992 — WRC-1992; lines digitised from its figures 1 and 3
  3. ISO 8249:2018 — ferrite number FN
  4. EN ISO 3581:2016 · AWS A5.4 — stainless filler classes
  5. EN 10025-2:2019 · EN 10088-2:2014 — nominal composition of the base metals

Indicative results: good for planning and ordering material; they do not replace the WPS.

← All calculators