We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket

Calculators

Filler metal consumption per weld

Bevelled butt and fillet welds. The preparation is filled in to EN ISO 9692-1 and any dimension can be replaced by your drawing's. The result is in kilos, as a range: from a flush weld to the maximum excess weld metal of EN ISO 5817.

Reference, covered electrode, level C: 1 m of single-V in 10 mm plate — 0.69–1.12 kg; 1 m of fillet with throat a 5 — 0.30–0.60 kg.

Weld
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
As the drawing or the WPS requires. EN 1090-2: EXC1 → D, EXC2 → C, EXC3 → B
Preparation — EN ISO 9692-1
Gap between the plates at the rootper EN ISO 9692-1 · ref. 1.3: b ≤ 4
Straight part of the edge, not bevelledper EN ISO 9692-1 · ref. 1.3: c ≤ 2
Total angle between both groove facesper EN ISO 9692-1 · ref. 1.3: 40° ≤ α ≤ 60°
Filler
Filler
ELOX SG 347 TIG · 141 — TIG rod
Deposition efficiency η
η 0.9405: TIG with filler rod, 0.99 less the stub s of a 1000 mm rod
Weld metal (density)
7.9 g/cm³
How we calculate it
  1. Preparation cross-section, without excess weld metal — EN ISO 9692-1, ref. 1.3
    A₀ = b·t + (t − c)²·tan(α/2) = 2·10 + (10 − 1)²·tan(50°/2) = 57.77 mm²
  2. Maximum excess weld metal of level C, EN ISO 5817 (imperfection 502 + 504)
    h ≤ 1 + 0.15·w, ≤ 7 mm; w = 10.39 mm → h = 2.56 mm root (504): h_r ≤ 1 + 0.45·b, ≤ 4 mm → h_r = 1.9 mm A = A₀ + ⅔·w·h + ⅔·b·h_r = 78.04 mm²
  3. Weld metal
    M = A·L·ρ = (57.8–78 mm²)·10 m·7.9 g/cm³ = 4.56–6.16 kg
  4. Filler metal to buy
    P = M / η = 4.56 / 0.9405 … 6.16 / 0.9405 = 4.85–6.56 kg η 0.9405: TIG with filler rod, 0.99 less the stub s of a 1000 mm rod

Reference values — 141 — TIG rod, level Cper 1 m of weld

ThicknessA, mm²Weld metal, kg/mFiller metal, kg/m
t 4 mm12.2–20.20.10–0.160.10–0.17
t 6 mm23.7–35.10.19–0.280.19–0.30
t 8 mm38.8–54.30.31–0.430.32–0.46
t 10 mm57.8–78.00.46–0.620.48–0.66

Weld cross-sectionto scale

w 10.4t 10b 2c 1α 50°

Real dimensions. Excess weld metal is drawn at the maximum of the chosen level; the dashed line is a flush weld.

ResultEN ISO 5817 · C

4.85–6.56 kg

of ELOX SG 347 TIG for 10 m of weld

per metre
for 10 m
Weld cross-section A
57.8–78.0 mm²
Weld metal
0.46–0.62 kg
4.56–6.16 kg
Filler metal
0.48–0.66 kg
4.85–6.56 kg

Vertical and overhead welding usually takes more.

Standards and sources

  1. EN ISO 9692-1:2013 — joint preparation, steel; processes 111, 13x, 141
  2. EN ISO 5817:2023 — quality levels B, C and D; imperfections 502, 503 and 504
  3. EN ISO 2553:2019 — throat a of the fillet weld; z = a·√2
  4. EN ISO 4063:2023 — process numbers
  5. EN 10088-1 — density of stainless steels
  6. EN ISO 2401:2018 — deposition efficiency η: definition and test method (covered electrodes)

Indicative results: good for planning and ordering material; they do not replace the WPS.

← All calculators