Calculators
Filler metal consumption per weld
Bevelled butt and fillet welds. The preparation is filled in to EN ISO 9692-1 and any dimension can be replaced by your drawing's. The result is in kilos, as a range: from a flush weld to the maximum excess weld metal of EN ISO 5817.
Reference, covered electrode, level C: 1 m of single-V in 10 mm plate — 0.69–1.12 kg; 1 m of fillet with throat a 5 — 0.30–0.60 kg.
How we calculate it
- Preparation cross-section, without excess weld metal — EN ISO 9692-1, ref. 1.3A₀ = b·t + (t − c)²·tan(α/2) = 2·10 + (10 − 1)²·tan(50°/2) = 57.77 mm²
- Maximum excess weld metal of level C, EN ISO 5817 (imperfection 502 + 504)h ≤ 1 + 0.15·w, ≤ 7 mm; w = 10.39 mm → h = 2.56 mm root (504): h_r ≤ 1 + 0.45·b, ≤ 4 mm → h_r = 1.9 mm A = A₀ + ⅔·w·h + ⅔·b·h_r = 78.04 mm²
- Weld metalM = A·L·ρ = (57.8–78 mm²)·10 m·8.9 g/cm³ = 5.14–6.95 kg
- Filler metal to buyP = M / η = 5.14 / 0.98 … 6.95 / 0.92 = 5.24–7.55 kg η 0.92–0.98: typical value for process 135
Reference values — 135 — solid wire MAG, level Cper 1 m of weld
| Thickness | A, mm² | Weld metal, kg/m | Filler metal, kg/m |
|---|---|---|---|
| t 4 mm | 12.2–20.2 | 0.11–0.18 | 0.11–0.20 |
| t 6 mm | 23.7–35.1 | 0.21–0.31 | 0.21–0.34 |
| t 8 mm | 38.8–54.3 | 0.35–0.48 | 0.35–0.53 |
| t 10 mm | 57.8–78.0 | 0.51–0.69 | 0.52–0.76 |
Weld cross-sectionto scale
Real dimensions. Excess weld metal is drawn at the maximum of the chosen level; the dashed line is a flush weld.
ResultEN ISO 5817 · C
5.24–7.55 kg
of DT-CuSn MIG for 10 m of weld
- per metre
- for 10 m
- Weld cross-section A
- 57.8–78.0 mm²
- Weld metal
- 0.51–0.69 kg
- 5.14–6.95 kg
- Filler metal
- 0.52–0.76 kg
- 5.24–7.55 kg
Vertical and overhead welding usually takes more.
Standards and sources
- EN ISO 9692-1:2013 — joint preparation, steel; processes 111, 13x, 141
- EN ISO 5817:2023 — quality levels B, C and D; imperfections 502, 503 and 504
- EN ISO 2553:2019 — throat a of the fillet weld; z = a·√2
- EN ISO 4063:2023 — process numbers
- EN 10088-1 — density of stainless steels
- EN ISO 2401:2018 — deposition efficiency η: definition and test method (covered electrodes)
Indicative results: good for planning and ordering material; they do not replace the WPS.
← All calculators